Dihydropyrimidine dehydrogenase (PydA) catalyzes the first step of the reductive pyrimidine degradation (Pyd) pathway in bacteria and eukaryotes, enabling pyrimidines to be utilized as substrates for growth. PydA homologs studied to date catalyze the reduction of uracil to dihydrouracil, coupled to the oxidation of NAD(P)H. Uracil reduction occurs at a flavin mononucleotide (FMN) site, and NAD(P)H oxidation occurs at a flavin adenine dinucleotide (FAD) site, with two ferredoxin domains thought to mediate inter-site electron transfer. Here, we report the biochemical characterization of a Clostridial PydA homolog (PydAc) from a Pyd gene cluster in the strict anaerobic bacterium Clostridium chromiireducens. PydAc lacks the FAD domain, and instead is able to catalyze uracil reduction using reduced methyl viologen or reduced ferredoxin as the electron source. Homologs of PydAc are present in Pyd gene clusters in many strict anaerobic bacteria, which use reduced ferredoxin as an intermediate in their energy metabolism.
The reductive pyrimidine degradation (Pyd) pathway is the most widespread pathway for the degradation of the pyrimidine ring, and is present in bacteria, archaea and eukaryotes . In this pathway, uracil is first reduced to dihydrouracil, catalyzed by dihydropyrimidine reductase (PydA) [2,3]. This de-aromatization of the pyrimidine ring facilitates subsequent hydrolysis by dihydropyrimidinase (PydB) and ureidopropionase (PydC), releasing ammonia and β-alanine for use as nitrogen and / or carbon sources for growth [2–5].
The only PydA homolog that has been structurally characterized is from Sus scrofa, and is a homodimer of 2 × 111 kD [6,7] (Figure 1A, left panel). Each protomer contains five domains (Figure 1B), and multiple cofactors involved in coupling the reduction of uracil to the oxidation of NADPH. The catalytic mechanism of this enzyme involves the rate-limiting oxidation of NADPH occurring in the flavin adenine dinucleotide (FAD) and NADPH domains, followed by the rapid transfer of two electrons to the flavin mononucleotide (FMN) domain, where uracil reduction occurs [7,8]. Electron transfer between the two flavin sites is mediated by two ferredoxin (Fdx) domains, each containing two [4Fe-4S] clusters (Figure 1A, left panel) .
PydAc is a variant of PydA present in anaerobic bacteria
The PydA enzymes that have been studied to date, in the context of the Pyd pathway, utilize NADPH as the electron source for uracil reduction. A related enzyme PreAT in Escherichia coli utilizes NADH for uracil reduction, and is not involved in the Pyd pathway (E. coli does not encode other enzymes in the Pyd pathway such as PydB and PydC, and is unable to use uracil as a nitrogen source for growth) . The physiological function of PreAT remains unknown. While mammalian PydA homologs contain all five domains in a single open reading frame (ORF), many bacterial PydA and PreAT homologs are split into two ORFs, with the first ORF (PydA1, PreA) containing the FAD, NADPH and one Fdx domain (colored blue and red respectively in Figure 1A,B), and the second ORF (PreT, PydA2) containing the FMN and other Fdx domain (colored green and yellow respectively in Figure 1A,B) [3,9].
While investigating variants of Pyd gene clusters in bacteria, we noticed a PydA variant (PydAc), present in Clostridiales bacteria including Clostridium chromiireducens and Clostridium pasteurianum (Figure 1B,C). PydAc lacks the FAD and NADPH domains, suggesting an inability to catalyze NAD(P)H-dependent uracil reduction. Because the energy metabolism of these strict anaerobic bacteria rely on reduced Fdx as an intermediate , we hypothesized that PydAc is a Fdx-dependent dihydropyrimidine dehydrogenase.
Here, we report the biochemical characterization of recombinant PydAc from C. chromiireducens. PydAc catalyzed the reduction of uracil with reduced methyl viologen (MV+) or reduced Fdx, but not NAD(P)H, as an electron donor. The distribution of PydA variants in metabolically diverse Firmicutes bacteria is discussed.
Materials and methods
Lysogeny Broth (Luria Broth, LB) medium was purchased from Oxoid Limited (Hampshire, U.K.). Clostridium chromiireducens C1 (DSM12136) was purchased from DSMZ (Deutsche Sammlung von mikroorganismen und Zellkulturen GmbH). Methanol and acetonitrile used for liquid chromatography–mass spectrometry (LC–MS) were high-purity solvents from Concord Technology (Minnesota, U.S.A.). Formic acid was purchased from Merck (New Jersey, U.S.A.). Water used in this work was ultrapure deionized water from Millipore Direct-Q. All protein purification chromatographic experiments were performed on an ÄKTA pure or ÄKTA prime plus FPLC machine equipped with appropriate columns. Protein concentrations were calculated from their absorbance at 280 nm, measured using a Nanodrop One (ThermoFisher Scientific, PA, U.S.A.). PydA spectrophotometric activity assays were carried out using a Nanophotometer NP80 Mobile. Anaerobic experiments were conducted in a Lab 2000 glovebox (Etelux, Beijing, China) under an atmosphere of N2 with less than 10 ppm O2.
Cloning, expression and purification of PydAc and Fdx
Codon-optimized gene fragments of C. chromiireducens PydAc (UniProt accession: A0A399ILH0) and C. pasteurianum Fdx (P00195) were synthesized by General Biosystems, Inc. (Anhui, China) and inserted into the modified pET28a vectors HT and HMT, respectively . For recombinant production of PydAc, E. coli BL21 (DE3) cells were co-transformed with plasmids HT-PydAc and pTf16 (TaKaRa), and grown in LB supplemented with 50 μg/ml kanamycin, 25 μg/ml chloramphenicol and 0.5 mg/ml L-arabinose. For recombinant production of Fdx with an N-terminal MBP (maltose binding protein) tag, E. coli BL21 (DE3) cells were transformed with the plasmid HMT-Fdx, and grown in LB supplemented with 50 μg/ml kanamycin. Both cultures (typically 0.8 L in a 2.6 L flask) were grown at 37°C while being shaken at 220 rpm. When OD600 reached ∼0.8, the temperature was decreased to 18°C and isopropyl β-D-1-thiogalactopyranoside (IPTG) was added to a final concentration of 0.3 mM to induce the production of the proteins. After 18 h, cells were harvested by centrifugation (8000 × g for 15 min at 4°C).
The cell paste was resuspended in lysis buffer (5 ml per g of cell paste) containing 50 mM Tris-HCl, pH 8.0, 1 mM phenylmethanesulfonyl fluoride (PMSF), 0.4 mg/mL lysozyme, 0.03% Triton X-100 and 0.03 mg/ml of DNase I (Roche, Germany). The cell suspension was frozen in a −80°C freezer, and then thawed and incubated at 25°C for 40 min to allow for lysis. A 6% solution of streptomycin sulfate in water was added to a final concentration of 1% to precipitate the DNA. The precipitate was removed by centrifugation (12,000 × g for 30 min at 4°C). The supernatant was then filtered through a 0.45 μm filter. β-Mercaptoethanol (BME) was added to a final concentration of 5 mM, and the sample was loaded onto a column containing 5 ml TALON Co2+-affinity resin (Clontech, California, U.S.A.), pre-equilibrated with buffer A [20 mM Tris-HCl, pH 7.5, 5 mM BME and 0.2 M KCl]. The column was washed with 10 column volumes (CV) of buffer A, and then the protein was eluted with 5 CV of buffer A containing 150 mM imidazole. The eluted protein was precipitated with solid (NH4)2SO4 to 70% saturation and isolated by centrifugation (20,000 × g for 10 min at 4°C). The pellet was dissolved in 3 ml of buffer A and desalted using a G25 column (GE, U.S.A., thermostat jacket tube XK16/20, packed 15 cm × 2 cm2, 30 ml), pre-equilibrated with buffer A. The eluted proteins were concentrated to ∼1.5 ml by ultrafiltration (VIVASPIN TURBO 15 (30,000MWCO), Sartorius, Germany), frozen in aliquots with liquid nitrogen and stored at −80°C until further use. The purified PydAc (ε280 = 37,360 M−1cm−1) and MBP-Fdx (ε280 = 69,330 M−1cm−1) were examined on a SDS-PAGE gel.
Reconstitution of the [4Fe-4S] clusters of PydAc and MBP-Fdx
Solutions of PydAc (50 μM) and HMT-Fdx (500 μM) were degassed on a Schlenk line and brought into the glovebox. The reconstitution buffer contained 10 mM dithiotheritol (DTT) and 100 mM Tris-HCl, pH 7.5. For reconstitution of PydAc, a solution of ferrous ammonium sulfate (16 eq.) was added followed by a solution of sodium sulfide (16 eq.). For reconstitution of MBP-Fdx, a solution of ferrous ammonium sulfate (8 eq.) was added followed by a solution of sodium sulfide (8 eq.). Both mixtures were incubated overnight at 4°C in a cooling-heating block (Dry Bath H2O3-100C, Coyote Bioscience, Beijing, China). Solutions of EDTA (16 eq. or 8 eq. respectively) were added, and excess of iron and sulfide removed by repeated concentration with a centrifugal filter unit (1.5 ml YM-30 Amicon, Millipore), and dilution with buffer containing 20 mM Tris-HCl, pH 7.5 and 0.1 M KCl.
MV+-dependent spectrophotometric activity assay for PydAc
MV2+ was pre-reduced to MV+ with Ti(III) citrate (∼0.8 eq.) in the glovebox, and quantified from its absorbance (ε600 = 13,700 M−1cm−1). In a typical assay, the 200 μl reaction mixture contained 0.2 μM reconstituted PydAc, 5 mM uracil, 15 μM FMN, 0.1 mM reduced MV+, 0.1 M KCl, and 20 mM of Tris-HCl, pH 7.5. The absorbance at 600 nm was monitored at 5 s intervals using the cuvette mode of a Nanophotometer NP80 Mobile in the glovebox. To determine enzyme dose-dependence, the assay was conducted with 5 mM uracil, and varying concentrations of PydAc. To obtain Michaelis–Menten kinetic parameters, the assay was conducted with 0.2 μM PydAc, and varying concentrations of uracil. Data analysis was conducted using GraphPad Prism6.
LC-MS detection of dihydrouracil
To detect dihydrouracil formation in the PydAc reaction, a 200 μl reaction mixture containing 20 mM Tris-HCl, pH 7.5, 0.1 M KCl, 15 μM FMN, 1 mM uracil, 10 mM reduced MV+ and 5 μM PydAc were incubated at room temperature (RT) for 60 min. Negative controls omitting either enzyme or substrate were also prepared. LC-MS analysis was performed on an Agilent 6420 Triple Quadrupole LC/MS instrument (Agilent Technologies, CA, U.S.A.). The drying gas temperature was maintained at 350°C with a flow rate of 12 L min–1 and a nebulizer pressure of 25 psi. LC was carried out on an Agilent ZORBAX SB-C18 column (4.6 × 250 mm, product number 880975-902). A linear gradient of acetonitrile (5-75% in H2O) containing 0.1% formic acid and a flow rate of 0.5 ml/min for 39 min were used for elution.
Fdx-dependent activity assay for PydAc
Reconstituted MBP-Fdx was photo-reduced by incubation with 10 μM acriflavine and 50 mM bicine in ambient light for 90 min in the glovebox . In a typical assay, a 200 μl reaction mixture containing 20 mM Tris-HCl, pH 7.5, 0.1 M KCl, 15 μM FMN, 5 μM PydAc, 1 mM uracil and 1 mM reduced MBP-Fdx was incubated at RT for 60 min in the glovebox. The product was analyzed by LC-MS on a Q Exactive™ HF/UltiMate™ 3000 RSLCnano (Thermo Fisher Technologies, PA, U.S.A.). The probe heater temperature was maintained at 300°C, electrospray voltage was set at +3800 V, capillary temperature was maintained at 250°C, Sheath Gas was set at 45 arb and Aux Gas was set at 12 arb. For mass spectra acquisition, resolution was 120,000, m/z scan range from 50 to 200, and data acquisition mode was full-scan. Uracil and dihydrouracil were detected through positive ion mode. LC was carried out on an Agilent ZORBAX SB-C18 column (4.6 × 250 mm, product number 880975-902) at 25°C. A linear gradient of acetonitrile (5-30% in H2O) containing 0.1% formic acid and a flow rate of 0.5 ml/min for 45 min were used for elution.
Bacterial culture using uracil as the sole nitrogen source
To prepare defined medium, 9 g Na2HPO4·12H2O, 1.5 g KH2PO4, 0.01 g MnSO4·H2O, 0.2 g MgSO4·7H2O, 0.01 g CaCl2·2H2O, 5 mg Na2·EDTA·2H2O, 1.5 mg CoCl2·6H2O, 1 mg ZnCl2, 0.1 mg H3BO3, 0.2 mg CuCl2·2H2O, 0.1 mg Na2MoO4·2H2O, 0.2 mg NiSO4·6H2O, 1 mg FeSO4 ·7H2O, 0.2 mg Na2SeO3, 0.4 mg Na2WO4·2H2O, 20 μg biotin, 20 μg folic acid, 100 μg pyridoxine-HCl, 50 μg thiamine-HCl, 50 μg riboflavin, 50 μg nicotinic acid, 50 μg D-Ca-pantothenate, 1 μg vitamin B12, 50 μg p-aminobenzoic acid, 50 μg lipoic acid, 17.5 μg inositol, 3.75 μg choline, 1.5 g Na-pyruvate and 20 g glucose were dissolved in 1 L distilled water. Either NH4Cl or uracil was added as the sole nitrogen source, adjusted to a molar equivalent of 20 mM nitrogen. The medium was then filtered through a sterile 0.22 μm filter.
Clostridium chromiireducens C1 was grown in 50 ml of DSM medium 104b in an anaerobic vial at 30°C for 2 days. A 30 μl portion of the culture was then transferred into 3 ml defined medium with different nitrogen sources (20 mM ammonium chloride or 10 mM uracil). Cells were cultivated anaerobically for another 4 days.
The homology model of C. chromiireducens PydAc was constructed using Phyre2 , with the crystal structure of S. scrofa dihydropyrimidine dehydrogenase (PDB: 1GTE) as a template  (37% sequence identity between the two proteins).
A list of 3419 bacterial PydA candidates was compiled from the UniProt database , identified as containing both dihydroorotate dehydrogenase (InterPro domain IPR005720)  and [4Fe-4S] ferredoxin (IPR017896) domains, and containing a PydB candidate in the amidohydrolase family (PF01979) within a 10-ORF window in their genome neighborhood. Genome neighborhood analysis was conducted using the web-based Enzyme Function Initiative Genome Neighborhood Tool . A sequence similarity network (SSN) was constructed using the web-based Enzyme Function Initiative Enzyme Similarity Tool (EFI-EST) , and visualized using Cytoscape v3.5 . The E-value threshold was adjusted to 10−140 (> ∼60% sequence identity is required to draw an edge). The sequence length was restricted to >350 amino acids to exclude partial sequences.
Identification of a PydA variant in anaerobic bacteria
Comparison of the domain structure of PydAc from C. chromiireducens with that of the previously studied PydA homologs from S. scrofa [6,7] and Brevibacillus agri  show that it contains the FMN domain and two Fdx domains in a single ORF, but lacks the FAD and NADPH domains (Figure 1A,B). A BLAST search did not reveal any homologs of the FAD and NADPH domains in the C. chromiireducens genome. A related PydAc variant in C. pasteurianum DSM 525 contains the FMN domain and one Fdx domain in one ORF, and a second Fdx domain in a separate ORF (Figure 1B,C). These two PydAc variants are present in several anaerobic bacteria. The absence of the FAD and NADPH domains suggests that PydAc does not use NAD(P)H as a reductant. We hypothesized that PydAc instead uses reduced Fdx as a reductant, because of the prominent role of Fdx in the metabolism of anaerobic bacteria.
Recombinant production and reconstitution of C. chromiireducens PydAc
To test our hypothesis, C. chromiireducens PydAc was recombinantly produced in E. coli, and purified to near homogeneity (Supplementary Figure S1). PydAc contains two bacteria Fdx domains, each containing 8 conserved Cys residues for the coordination of two [4Fe-4S] clusters. Purified recombinant PydAc exhibited a brown color, and contained 0.57 ± 0.10 Fe and 0.72 ± 0.10 S per monomer. Anaerobic reconstitution of the PydAc [4Fe-4S] clusters resulted in 12.8 ± 0.2 Fe and 6.9 ± 0.4 S per monomer (out of the theoretical maximum of 16 Fe and 16 S), and typical UV–Vis spectra for a [4Fe-4S] cluster-containing protein (Figure 2A).
Reconstitution of PydAc [4Fe-4S] clusters and activity assays
MV+-dependent uracil reduction by PydAc
PydAc was assayed for uracil reduction activity using MV+ as the electron donor. Anaerobic incubation of purified and reconstituted PydAc in the presence of uracil and MV+ resulted in the time-dependent decrease in A600, corresponding to the oxidation of MV+ to MV2+ (Figure 2B). No reaction was observed in negative controls omitting PydAc or uracil (Supplementary Figure S2). PydAc exhibited Michaelis–Menten kinetics for uracil reduction (Figure 2C, kcat = 0.92 ± 0.04 s−1 per PydAc peptide, Km = 0.13 ± 0.03 mM). Leaving out the [4Fe-4S] reconstitution step led to abolishment of activity, and omission of FMN from the assay mixture led to a large decrease in activity (Figure 2D). The requirement for FMN addition was not observed for assays of PydA homologs purified from native S. scrofa  and E. coli , and may be a consequence of the recombinant PydAc being produced in a predominantly apo form.
LC-MS analyses of PydAc-catalyzed uracil reduction with MV+ as the reductant
Fdx-dependent uracil reduction by PydAc
We next tested if PydAc-catalyzed uracil reduction could be supported with photo-reduced Fdx as the reductant, followed by LC-MS analysis. The EIC chromatogram (m/z 115) of the complete reaction showed a peak eluting at a retention time of 8.31 min (Figure 4A), corresponding to dihydrouracil, confirmed by ESI-MS (m/z) (Figure 4B).
LC-MS analysis of PydAc-catalyzed uracil reduction with ferredoxin as the reductant
Uracil as the sole nitrogen source supports growth of C. chromiireducens
Next, we investigated the ability of C. chromiireducens to use uracil as a nitrogen source. Clostridium chromiireducens could grow in defined medium with either ammonium or uracil as the sole nitrogen source (Supplementary Figure S3). No growth was observed in the negative control, in which the nitrogen source was omitted.
PydAc is present in anaerobic bacteria in the order Clostridiales
To investigate the occurrence of PydAc in bacteria, a SSN of 3419 candidate PydA sequences was constructed (Figure 5), and the gene clusters were examined for the presence of a pyridine nucleotide oxidoreductase domain (Pyr_redox_2, PF07992), indicative in theory of the ability to use NAD(P)H as a reductant. The majority of the PydA sequences (2781 total) contained a Pyr_redox_2 domain protein in an adjacent ORF (Figure 5A), including several organisms, in which the Pyd pathway was previously studied (Brevibacillus agri , Bacillus smithii , Bacillus megaterium , Pseudomonas putida ). A further 29 sequences contained a Pyr_redox_2 domain within the same polypeptide.
SSN analysis of bacterial PydA homologs
Among the PydA candidates that were not associated with a Pyr_redox_2 domain, the majority belong to strict anaerobic bacteria in the order Clostridiales (Figure 5B), including C. chromiireducens PydAc. The lack of the Pyr_redox_2 domain suggests that these homologs do not use NAD(P)H as a reductant and may, like PydAc, use reduced Fdx as a reductant.
Characterization of PydAc adds to the diversity of the dihydroorotate dehydrogenase (PyrD) family, which includes the pyrimidine biosynthesis enzyme PyrD, and the pyrimidine degradation enzyme PydA. Different classes of PyrD use either NAD+, fumarate or quinones as an oxidant for dihydroorotate oxidation . PydA uses NADPH and PreAT uses NADH  as a reductant for uracil reduction, while the newly reported PydAc uses reduced Fdx.
Unlike previously characterized PydA homologs, PydAc lacks the NADH/FAD domains. However, it retains the two Fdx domains containing theoretically four [4Fe-4S] clusters, thought to provide a conduit for electron transfer from the FAD to the FMN site, where uracil reduction occurs. We hypothesize that the same route could be taken for electron transfer from reduced Fdx (Figure 1A, right panel).
Our bioinformatics analysis revealed that the PydAc variant most commonly occurs in bacteria in the order Clostridiales. These bacteria use reduced Fdx for their energy metabolism, suggesting the availability of reduced Fdx for the degradative Pyd pathway as well, and highlighting the importance of Fdx-dependent reactions in these strict anaerobic bacteria.
The authors declare that there are no competing interests associated with the manuscript.
This work was supported by the National Key R&D Program of China [grant number 2019YFA0905700]; the National Natural Science Foundation of China [grant number 31870049 (to Y.Z.)]; and the Agency for Science, Research and Technology of Singapore Visiting Investigator Program [grant number 1535j00137 (to H.Z.)].
F.W., Y.W. and Q.L. designed and carried out experiments with the cloning, expression, purification and enzyme activity assays of PydAc and MBP-FdX. Y.W. and F.W. designed and carried out experiments with bioinformatics and were involved in conceptualizing the project and writing the manuscript. E.L.A., H.Z. and Y.Z. were involved in conceptualizing the project, getting grants for the project, overall supervision of the project and writing the manuscript.
We thank the instrument analytical center of School of Pharmaceutical Science and Technology at Tianjin University for providing the LC-MS analysis and Zhi Li, Dr Xinghua Jin, Dr Yan Gao and Dr Xiangyang Zhang for the helpful discussion.
flavin adenine dinucleotide
These authors contributed equally to this work.